The hydraulic oils commonly used in photovoltaic pile drivers mainly include anti-wear hydraulic oil, low-temperature hydraulic oil, etc. Due to different climatic conditions in different regions, there are certain differences in the selection of hydraulic oil. The following are the specific situations:
High temperature areas
Applicable hydraulic oil types: usually choose ISO 46 anti-wear hydraulic oil or other hydraulic oil with higher viscosity.
Analysis of the cause: The ambient temperature in high-temperature areas is high. Hydraulic oil with higher viscosity can maintain better stability and performance at high temperatures, which can reduce the risk of leakage caused by the thinning of hydraulic oil at high temperatures, and provide good lubrication, cooling and sealing for the hydraulic system of the pile driver, ensuring the normal operation of the system in high-temperature environments, such as desert areas in the Middle East.
Cold Regions
Applicable hydraulic oil types: Generally recommended to use L-HV low temperature hydraulic oil or L-HS ultra-low temperature hydraulic oil
Cause analysis: In cold regions, such as China's northeast region and parts of Russia, the winter temperature often drops to very low levels. The viscosity of ordinary hydraulic oil will increase significantly at low temperatures, and may even solidify, making it difficult to start the hydraulic system. , poor operation and other problems. Low-temperature hydraulic oil has a low pour point and good low-temperature fluidity, and can quickly reach various lubrication parts in a low-temperature environment, ensuring that the hydraulic system starts and works normally under cold conditions.
Temperate regions
Applicable hydraulic oil types: ISO 32 or ISO 46 anti-wear hydraulic oil are more commonly used.
Analysis of the reasons: The climate in temperate zones is relatively mild, and the temperature range is relatively small. These two types of hydraulic oils can basically meet the use needs of temperate zones most of the time. ISO 32 hydraulic oil has a lower viscosity and better fluidity in seasons or environments with slightly lower temperatures. It is suitable for some photovoltaic pile drivers that require higher response speeds; ISO 46 hydraulic oil can provide better stability and lubrication performance in high temperatures in summer or when the equipment is under heavy load.
High humidity areas
Applicable hydraulic oil types: anti-wear hydraulic oil with good anti-emulsification and anti-rust properties, such as Mobil DTE 20 series.
Cause analysis: In high humidity areas, such as Jiangnan region in China and some countries in Southeast Asia, the moisture content in the air is high, and the hydraulic oil is easily contaminated by moisture and emulsified and deteriorated, affecting the normal operation of the hydraulic system. Therefore, it is necessary to use hydraulic oil with good anti-emulsification properties, which can quickly separate from water to prevent the occurrence of emulsification. At the same time, good rust resistance can protect the metal parts of the hydraulic system from corrosion.
Whether it is for highway guardrail pile drivers or photovoltaic pile drivers, high-quality steel, alloys and other raw materials are crucial to the structural strength and durability of pile drivers. For some important working parts, it is necessary to strengthen and thicken the steel to meet the performance requirements of the pile driver's severe vibration. For example, hammer splints, vertical guide rails, walking tracks, etc.
The steel used by our company is very reliable: the whole vehicle adopts national standard steel, and higher strength and thicker steel is used on important working parts to ensure the working requirements and durability of the pile driver, creating greater value for customers. For example, our hammer splints and vertical guide rails use Q345 and Q355 high-strength manganese steel, which is very strong and durable. There have been no problems in the past 10 years, and this is something that most pile driver manufacturers cannot do. The T10mm steel used by general manufacturers is not durable, and the overall stability and safety of the machine are greatly reduced.
By measuring the thickness of the steel used in the pile driver, we can roughly judge some of the performance of the pile driver. The steel used in the product can largely determine the performance of the machine. Therefore, when choosing and purchasing a pile driver, you must use a professional eye to measure it.
Whether it's highway guardrail pile drivers, solar photovoltaic pile drivers, drilling machines, down-the-hole drills, or even all construction machinery, I think the following aspects can largely determine the quality of mechanical products. This is just my personal opinion, and I welcome exchanges.
I. Design and Engineering Technology
Reasonable overall structural design is the core element in ensuring product quality. The application of advanced engineering technologies, such as Computer-Aided Design (CAD) and simulation analysis software, enables virtual testing and optimization of structural strength, dynamic performance, etc. before actual product manufacturing, reducing design flaws and enhancing the reliability of product quality. The design of guardrail pile drivers needs to take into account the compatibility with different specifications of guardrail piles, the control of pile driving verticality, work efficiency, as well as the convenience of operation and maintenance. For example, different pile types need to be matched with different pile driving hammers. The application scenarios of photovoltaic pile drivers are more complex. When designing solar pile drivers, factors such as the distribution of the equipment's center of gravity, operability, and adaptability to different photovoltaic site terrains need to be considered. For instance, a reasonable chassis and traveling mechanism can ensure that the pile driver can move smoothly and be positioned accurately in complex terrains like sandy areas and hills, and adding different counterweights can maintain the stability of the center of gravity of the photovoltaic pile driver during work and prevent accidents. Our company has a sophisticated R&D team that is proficient in CAD and various simulation analysis software, and their expertise is the greatest support for the quality assurance of our products.
II. Quality of Raw Materials and Components
High-quality raw materials such as steel and alloys are crucial for the structural strength and durability of pile drivers. For highway guardrail pile drivers and Solar Photovoltaic pile drivers, the quality of key components like drill bits, engines, and hydraulic systems directly affects the working efficiency, stability, and durability of the equipment. For example, the steel materials used by our company are very reliable: the whole vehicle uses national standard steel materials, including Q355 high-strength steel plates and Q345 manganese steel. For example, we use 14-mm-thick Q355 manganese plates for the hammer clamping plates, which are sturdy, durable, and not prone to breakage; for the whole vehicle's wear-resistant plates, we use wear-resistant nylon. We deeply understand that the materials used in products and the quality of components are the most fundamental and important aspects in ensuring the quality of pile drivers.
III. Production Processes and Manufacturing Procedures
For example, in the welding process, the adoption of advanced welding techniques and strict control of welding process parameters can ensure the welding quality of the structural parts of the pile driver, avoiding welding defects such as pores and cracks, thus ensuring the overall structural strength of the equipment. Here, I would like to briefly and proudly introduce our processing techniques. 1. Blanking method: Laser blanking (with high precision, fast speed, and small deformation). 2. Welding. 3. Machining (For important components, the guide rails are processed by boring machines and machining centers for higher precision, and the drill bit caps are processed by CNC milling machines). 4. Surface treatment: Shot blasting (to remove the surface oxide layer and rust and increase the adhesion of subsequent painting). 5. Cleaning and grinding (to check the areas not processed by the shot blasting machine and conduct secondary treatment). 6. Painting: We use electrostatic spray guns. The powder coating is melted, leveled, and cured after heating, so that the sprayed workpieces will be more durable and have stronger ultraviolet resistance.
IV. Personnel Quality and Skill Training
Ultimately, product quality is created and ensured by people, so the quality and skill level of enterprise employees have a profound impact on product quality. Operators on the production line need to possess proficient operating skills and rich experience, be able to accurately understand and execute production process requirements, and avoid product quality problems caused by human operation errors. For example, skilled assembly workers can ensure the correct installation of components, and debugging engineers can precisely debug and optimize the equipment to make it reach the best performance state.
V. Quality Control and Inspection System
Product quality is not just talk. Whether the product quality meets the standards must be verified through product quality inspections. Only in this way can we ensure that the products delivered to customers are of reliable quality and satisfy them. Establishing a sound quality control system is the cornerstone for ensuring stable product quality. Enterprises should formulate strict quality control standards and procedures to conduct comprehensive management of all aspects such as raw material procurement, production process monitoring, and finished product inspection. And all of our products have passed ISO 9001 and CE certifications.
IPv6 network supported
